Description

Notes: 1.Please check whether it is fit your vehicle before purchase. This item is compatible with universal vehicles: Car, SUV, ATV, VAN, Pickup Truck, Bus, Wagon, Motorcycle etc. (Please confirm plug type of your vehicle,Thank you!) Compatible With: H8/H9/H11 Specifications: Power: 110W Light source: COB imported chip; 1021 top chip. Color temperature: 6000K white light Material: 6063 Aviation Aluminum Luminous flux: 11000LM (pair) Working voltage: 9V-36V Protection level: IP67 Heat dissipation principle: aviation aluminum body self-heating Working temperature: -40°~+135° Working life: ≥50000h Product selling point: One-piece compact size, non-destructive installation, plug and play, 0 second startup; 360° non-dead-angle lighting, high-brightness automotive LED headlights: powerful heat dissipation, instantaneous brightness, support stroboscopic High-brightness lighting: Compared with traditional halogen lighting, it has 300% brightness commission, and the penetration distance is increased by 100 meters 0.01S high-brightness quick start: traditional xenon lamps are affected by physical factors, and the brightness of the car lights is gradually increased. Using copper-based thermoelectric separation is more efficient and safer LED headlight advantages: 1. LED lamps are more energy and power than conventional halogen lamps. The brightness is close to the xenon lamp, but the LED lights are illuminated without delay to enhance road safety. Instantly start without strong current impact, improve battery life by more than 30%. 2. Fast cooling, using the most advanced, heat-dissipating structural design. Low warranty: The power driver adopts a wide voltage constant current mode which has a simple structure, so that the automobile can flexibly cope with various voltage unstable conditions, and has achieved the purpose of less component damage. Compared to HID ballast maintenance, The repair probability is very low which is less than 80%. 3. Low heating temperature, The working temperature of helium can reach 800°-1000° 4. LED headlight has a simple structure, and the parts are less than the xenon lamp, which is lower than the xenon lamp failure rate! 5. Car LED headlight color temperature are balancing. Xenon bulbs are clear in the same color, about 6000K. Install Caution 1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process. 2. Put the vehicle into park or make sure it is securely in gear. 3. Be sure to turn off the ignition and remove the key. 4. Be careful to avoid burns, especially when turning on or off the vehicles lighting. 5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting. 6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems. 7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.